Page 2 of 2

Re: Bob Taft (Cdragon) Pottery

Posted: May 1st, '14, 02:16
by ethan
Great to read about the hard work. The cost of wood seems to be a factor in the operation, but one might fear soft pine would make a problem w/ turpentine or logs that are not dry enough could emit sap. I'm sure you don't need to join a gym doing that hard work. Good luck w/ the end results.

Re: Bob Taft (Cdragon) Pottery

Posted: May 1st, '14, 08:04
by Cdragon
Actually the cost of wood is nothing. There are plenty of agro industrial forests of tall, straight, fast growing pine down here. You see them tightly packed in rows. Totally unnatural compared to a real forest. At the mill the trees are squared off and we get the outer bark usually accompanied by a equal or more section of wood. It is scrap to them. They want it gone before it gets buggy. Chainsawed into thirds. The bark usually drops off and we have a nice board, flat on the cut side, with the rounded outer part of the tree on the other. With the rounded side you can stack them so you get airflow to dry them out.

When we are firing a really dry load we've done it in 9 -10 hours. Wet loads have taken 16 - 17 hours.

Re: Bob Taft (Cdragon) Pottery

Posted: May 4th, '14, 07:53
by Cdragon
Okay here's what we got. With the bagwall and without.
bagwall.jpg
bagwall.jpg (22.83 KiB) Viewed 1663 times
groundhog.jpg
groundhog.jpg (21.09 KiB) Viewed 1663 times
It was a real good firing.

Re: Bob Taft (Cdragon) Pottery

Posted: May 4th, '14, 11:03
by Chip
Looks like really nice wares and a great firing for you! Congrats, of course looking forward to seeing close-ups!

Thanks for sharing Cdragon.

Re: Bob Taft (Cdragon) Pottery

Posted: May 4th, '14, 11:40
by debunix
Quite a variety of styles, from very spare to densely decorated. The closeups should be very interesting, indeed.

Re: Bob Taft (Cdragon) Pottery

Posted: May 4th, '14, 22:22
by Cdragon
Well my best one was a little devil.
small_devil.jpg
small_devil.jpg (16.59 KiB) Viewed 1658 times
small_devil_2.jpg
small_devil_2.jpg (12.86 KiB) Viewed 1658 times
small_devil_3.jpg
small_devil_3.jpg (14.13 KiB) Viewed 1658 times

Re: Bob Taft (Cdragon) Pottery

Posted: May 4th, '14, 22:52
by Cdragon
Got a picture of one of the tables.
table_2_1.jpg
table_2_1.jpg (17.29 KiB) Viewed 1657 times
The crock with the Iris carving is mine along with the shino pitcher, little devil and the white vase.
table_2_2.jpg
table_2_2.jpg (16.13 KiB) Viewed 1657 times
this is some of Justin Guy's work. Iron slip with a white slip trailed on the outline. A typical Edgefield style. Bulbous shape, handle off the shoulder, a flanged neck, and iron decoration with slip trailing that started in this area in the 1840's. A deer is not typical of the old time pots though.

Re: Bob Taft (Cdragon) Pottery

Posted: May 4th, '14, 23:15
by Cdragon
Here is a couple bagwall shots.
bagwall_2.jpg
bagwall_2.jpg (25.01 KiB) Viewed 1657 times
bagwall_3.jpg
bagwall_3.jpg (30.19 KiB) Viewed 1657 times
There is a great looking blue misting on the glazes where the ash hit.

Re: Bob Taft (Cdragon) Pottery

Posted: Aug 10th, '14, 20:10
by Classica
Very nice tea bowls. Let us know when the Etsy is up; I know I'd love to support a fellow South Carolinian!

Re: Bob Taft (Cdragon) Pottery

Posted: Aug 12th, '15, 15:57
by bryan_drinks_tea
Another south carolinian here.

CDragon - thanks for sharing the pottery with us, I'm an hour and a half from you, so I will visit when I get the time.

The face jugs are always interesting, they've been a part of South Carolina history for as long as I've known.

Best,
Bryan