Moss Beach Ceramics - Matt Brown (Moss) - Ceramics pics


Artisans share their TeawareArt.

Trade

Postby Moss » May 21st, '09, 21:40

Colorado. I'd be up for it.

Thanks for the kind words. I like utilitarian too although it may not be THAT utilitarian...

Let me look over your stuff and we'll work something out.

What I have on Etsy is more or less what I have around right now. Maybe take a look there?
User avatar
Moss
TeawareArtisan Member
 
Posts: 109
Joined: May 16th, '
Location: Moss Beach, California

Chopstick rests

Postby Moss » May 21st, '09, 21:40

I like that. I can look at that. I threw three vases today. Lots of ideas bubbling around right now.
User avatar
Moss
TeawareArtisan Member
 
Posts: 109
Joined: May 16th, '
Location: Moss Beach, California

Few items from the last firing

Postby Moss » May 23rd, '09, 10:30

Haven't photoed the last firing till last night. All the Chawans were gone right away so no chance to take them.

Image
Image
White Crackle Yunomi with Shino interior
Image
White Crackle Yunomi with Shino interior
Image
Image
Two separate monks cup with glaze variations
Image
Plate
User avatar
Moss
TeawareArtisan Member
 
Posts: 109
Joined: May 16th, '
Location: Moss Beach, California

Postby Dresden » May 23rd, '09, 10:47

The white crackle yunomi is very nice!
User avatar
Dresden
 
Posts: 428
Joined: Apr 18th, '
Location: Louisiana Gulf Coast

Postby Aphroditea » May 23rd, '09, 12:07

I guess I have something for monks...or at least their cups! I love them! I can't decide which one I like the most :) I'm a sucker for drips, tho.
The white crackle yunomi is very nice as well - quite pleasing.
User avatar
Aphroditea
 
Posts: 329
Joined: Jan 31st, '

Postby Zygote » May 23rd, '09, 13:23

Are these from the last firing?
User avatar
Zygote
TeawareArtisan Member
 
Posts: 46
Joined: May 16th, '

Last Firing

Postby Moss » May 23rd, '09, 13:29

Yes. The rest went to Teance in Berkeley.

Hi Joel! Running out the door. Have to chat later. Welcome!
User avatar
Moss
TeawareArtisan Member
 
Posts: 109
Joined: May 16th, '
Location: Moss Beach, California

Postby Salsero » May 23rd, '09, 13:47

Mmmm, something like this might make a nice teaboat.Image
but I can't find it on your site. Is it sold?

Currently I am using a pie plate, which works quite nicely: low sides, flat bottom, about 9" to 10" in diameter. But it lacks panache ... and the flared sides make it hard to sidle up to my Zojirushi.
Image

Does anyone else look at these ceramic pieces and think "teaboat"?

Straight sides so it can get close to my Zojirushi, dishwasher safe or at least very impermeable to constant tea spills and generally splashing around. If tea stains would make it prettier over time, that would also be a plus.

This one draws too much attention to itself:
Image

This shape is nice for basting the teapot, but not good for holding cups and catching tea slobber and spills:
Image
And really it should have something in the center to hold the pot up out of the water.

Does anyone else feel the need for a teaboat? What design features?
User avatar
Salsero
 
Posts: 5214
Joined: Dec 21st, '
Location: Gainesville, Florida

Postby Aphroditea » May 23rd, '09, 15:39

Teaboat is exactly what I voted for in the tea artisan forum :) I have wanted a tea boat (cha chuan) or a cha chen (like a tea boat but with a lid that has holes in it). The cha chen allows you to put the pot and other peices on the lid, but some tea boats have a slightly raised center which I like, but, as you pointed out, the design typically allows only the teapot to be in the boat.

Sal, I love your pie plate - only you could pull it off with a modicrum of panache ;)
User avatar
Aphroditea
 
Posts: 329
Joined: Jan 31st, '

Postby Herb_Master » May 23rd, '09, 17:46

Salsero wrote:
And really it should have something in the center to hold the pot up out of the water.

Does anyone else feel the need for a teaboat? What design features?



Or a matching complementary baby boat :shock:

If I take a break during a Gong Fu Session, On restart I want to warm the pot from the outside - but want it to be only slightly larger than the teapot so I don't need to surround it with an ocean of hot water

Possibly a baby boat that would fit on the raised pedestal you would like, but I certainly want a decent sized moat around the pedestal, on my current tea boat it is impossible to get anything but the smallest teabowls in.
User avatar
Herb_Master
 
Posts: 1808
Joined: Jun 4th, '0
Location: Stockport, England

Postby Salsero » May 23rd, '09, 18:04

Herb_Master wrote: Or a matching complementary baby boat
How about a little broad yunomi that you could put in the middle--inverted--when you want a pedestal. When you don't want a pedestal, take it out and drink out of it!
User avatar
Salsero
 
Posts: 5214
Joined: Dec 21st, '
Location: Gainesville, Florida

Postby Moss » May 23rd, '09, 18:44

"This one draws too much attention to itself:"

You mean the colors or the California Raisins?
User avatar
Moss
TeawareArtisan Member
 
Posts: 109
Joined: May 16th, '
Location: Moss Beach, California

Postby Moss » May 23rd, '09, 18:47

" How about a little broad yunomi that you could put in the middle--inverted--when you want a pedestal. When you don't want a pedestal, take it out and drink out of it!"

Interesting. I think though that the foot would be ugly as it would have to serve two purposes. Might be worth thinking about though.

Some tea boats I have seen have a flat lid with drains in it. Would that work?

This bowl is sold indeed, but I like this form and have several here in bisque that I can fire.
User avatar
Moss
TeawareArtisan Member
 
Posts: 109
Joined: May 16th, '
Location: Moss Beach, California

Postby Salsero » May 23rd, '09, 19:38

Moss wrote: Interesting. I think though that the foot would be ugly as it would have to serve two purposes. Might be worth thinking about though.

Some tea boats I have seen have a flat lid with drains in it. Would that work?

This bowl is sold indeed, but I like this form and have several here in bisque that I can fire.
I agree about the foot, and the foot of a yunomi is critical.

Instead of a lid, maybe just a flat 2" circle of clay (with holes, I suppose) that could be placed in the tea boat or not depending on the needs of the moment. If it was a half inch thick, you could still brush the teapot with water from the boat, but it wouldn't be sitting in it.

Gee, I hope you are not holding those things in Lobster Bisque: that would be a great waste of lobster.

If they finish to about 9" to 10" in diameter, I would definitely be interested in one similar to the sold one quoted above.
User avatar
Salsero
 
Posts: 5214
Joined: Dec 21st, '
Location: Gainesville, Florida

Boat

Postby Moss » May 23rd, '09, 20:15

The ones I have are going to be more in the 6-7" range. I will throw some though, like I say, I like the form. You think there should be about 1/2" for the ring? That would be enough lift? I can try a few.
User avatar
Moss
TeawareArtisan Member
 
Posts: 109
Joined: May 16th, '
Location: Moss Beach, California

PreviousNext

Instant Messenger

Permissions
You cannot post new topics
You cannot reply to topics
You cannot edit your posts
You cannot delete your posts
You cannot post attachments
Navigation