brewing with korean infuser cups


Made from leaves that have not been oxidized.

brewing with korean infuser cups

Postby teaisme » Nov 22nd, '11, 17:13

Perhaps I have been a bit too quick to overlook this form of teaware? Somewhere in my head I had the idea that tea made from these things is just not that good (even though I had never tried).

Well I partially take it back now...popped a handful of taiwanese bilochun into the infuser, filled the cup up with water, and very slowly began to immerse the infuser into the cup (gently so water would not overflow out). Did not cover on all infusions. After first brew about 1/2-2/3 of the leaf looked saturated with water. After second steep leaves at top are still dry at the tips. 3rd, 4th, all with pretty good aspects of first infusion that I enjoy so much in this tea....

Usually when I brew this tea I aim for 3 infusions because durability is not that high unless I use a real small pot or pack very heavy. I have never had a 4th steep of this tea that matched the quality produced from this korean cup.

Anyone enjoy using these cups? Have any tips on how to use them. I think filling the cup first then slowly putting infuser in when time is right has benefits that are worth exploring for certain teas (esp the delicate ones).
User avatar
teaisme
 
Posts: 1390
Joined: May 27th, '

Re: brewing with korean infuser cups

Postby needaTEAcher » Jan 7th, '12, 00:54

If it is what I am thinking of, then I prefer to pour the water over the leaves, and pull the basket out when finished with the steep. This gets all the leaves wet initially. I will also use a wooden pick (I do not know the proper name for this tool) to push the leaves down and make sure the leaves get mixed as much as possible into the water.

Can you post a photo of your Korean infusion device?
User avatar
needaTEAcher
 
Posts: 505
Joined: Oct 6th, '1
Location: Hong Kong, next China

Re: brewing with korean infuser cups

Postby teaisme » Jan 9th, '12, 14:38

sorry I don't post pics :mrgreen:

It looks pretty standard though, green celadon, newer but not the newest ones, has cranes and trees, and pretty thick and heavy
User avatar
teaisme
 
Posts: 1390
Joined: May 27th, '

Re: brewing with korean infuser cups

Postby needaTEAcher » Jan 10th, '12, 20:27

Can you post a link to someting similair? Sorry, I'm in Insadong 3 or 4 times a week, and I see tons of different infusion devices, so I am not 100% on exactly what you have.
User avatar
needaTEAcher
 
Posts: 505
Joined: Oct 6th, '1
Location: Hong Kong, next China

Re: brewing with korean infuser cups

Postby teaisme » Jan 11th, '12, 17:01

http://www.korean-arts.com/tea_ware/tea ... up_set.htm

Like that except looks like older version, and instead of a wisp of clouds its a tree

These things really hold heat well, though the boazhong that I thought might play well with it did not, bilochun and moa feng brewed great in them
User avatar
teaisme
 
Posts: 1390
Joined: May 27th, '

Re: brewing with korean infuser cups

Postby debunix » Jan 11th, '12, 17:11

I have had a couple of these, and found them quite nice for green teas, but impractical for hot-brewed teas (oolongs, puerhs. They're compact and sturdy enough for travel used, but traveling is when I'm most likely to brew hot-water teas, because it's harder to control temps when on the road. So I gave them away, lovely as they were, because they just didn't find as much use as some of my other teaware. It was not easy to part with them, but I figure they were too nice to sit in the back of my cupboard, waiting, waiting, waiting for some use.
User avatar
debunix
 
Posts: 5071
Joined: Jan 10th, '
Location: Los Angeles, CA

Re: brewing with korean infuser cups

Postby needaTEAcher » Jan 13th, '12, 03:15

Ya, that's what I thought you meant. I thought it might have been this one, which is really just a travel gaiwan:
2012-01-13 15.53.25.jpg
2012-01-13 15.53.25.jpg (64.27 KiB) Viewed 874 times


I stand by what I said above. I had a very similar one, which I LOVED. I kept it at work, and when I had to move rooms it broke (the box it was in broke). :cry:

I just got this one for a 67 baozhong I posted elsewhere. It is 50ish ml. Happy sipping all!
User avatar
needaTEAcher
 
Posts: 505
Joined: Oct 6th, '1
Location: Hong Kong, next China

Re: brewing with korean infuser cups

Postby kasey » Feb 3rd, '12, 03:23

I'm not familiar with Korean infusion cups. It sounds like they have fine holes in the infuser basket and not enough of them.
I am very happy with an infusion basket I bought from Teavana online. It's made of stainless steel, has about a million tiny holes and fills up your cup immediately as you pour in the water. Likewise, it drains really fast. Makes a great cuppa tea.
kasey
 
Posts: 78
Joined: Sep 5th, '0
Location: Suburban Washington D.C.

Re: brewing with korean infuser cups

Postby Chip » Feb 4th, '12, 02:28

... ummm, yeah ... but this is a Korean infuser cup topic. :idea:

... and we know you like the Teavana infuser.
User avatar
Chip
Mod/Admin
 
Posts: 22157
Joined: Apr 22nd, '
Location: Back in the TeaCave atop Mt. Fuji


Instant Messenger

Permissions
You cannot post new topics
You cannot reply to topics
You cannot edit your posts
You cannot delete your posts
You cannot post attachments
Navigation