Fixing Teapot's Spout


Discussion on virtually any teaware related item.

Fixing Teapot's Spout

Postby Maitre_Tea » Feb 10th, '13, 04:00

So I figured I'd start a new topic, rather than clog the Show Off page with irrelevant information. So there's a pretty big chip missing from the spout. It pours fine (surprisingly enough), but is there anyway to make it more presentable? I.E. wrap some sort of metal around it?
Attachments
20130210_152934.jpg
20130210_152934.jpg (42.22 KiB) Viewed 1767 times
User avatar
Maitre_Tea
 
Posts: 803
Joined: Sep 3rd, '0
Location: Claremont,CA

Re: Fixing Teapot's Spout

Postby MarshalN » Feb 10th, '13, 07:50

Did you use one of those bone/wooden sticks to try to clear the spout, and ended up with a broken one? As I always say - toothpicks are the way to go there.

If it's pouring ok, I'd just leave it. Your only real options are glue, or filing it down, but this is pretty far down to file. The third option is to try to get some other clay, etc, but that's a pretty complicated process and it might not come out right anyway.
User avatar
MarshalN
 
Posts: 2105
Joined: Mar 15th, '

Re: Fixing Teapot's Spout

Postby gasninja » Feb 10th, '13, 10:02

If you have the missing chip you could use tingjunkies patented jb weld maine edition yixing repair method.

If not kintsugi.
http://listeningtoleaves.blogspot.com/2012/11/kintsugi-art-of-repairing-teaware.html
User avatar
gasninja
 
Posts: 618
Joined: Mar 10th, '
Location: Mount Zion

Re: Fixing Teapot's Spout

Postby tingjunkie » Feb 10th, '13, 11:15

A few ideas...

1) Brandon fixed a gaiwan lid with some silicone caulk and it worked pretty well. Since the silicone is non toxic and food safe, you could theoretically insert a straw into the spout temporarily, and then build up the wall by shaping the silicone around it. Once it dries, remove the straw, trim the silicone, and then wrap some half-round silver wire around it for looks. If you did that, you'd probably want to turn the spout into a flat-ended canon style so the wire would wrap around evenly.

2) If you have access to a kiln or jewlers blow torch, you could try using silver clay to make a cap for the spout. Roll out a sheet, wrap it around, smooth the seams, and trim the excess. I've never worked with this stuff, but have always wanted to give it a try. No guarantees that the pot wouldn't crack. I'd try it though.

3) For a more steampunk look, you could take a food safe metal sheet, wrap it around the spout, and use tiny bolts to hold it on place.

All depends on your mechanical skills.
Last edited by tingjunkie on Feb 10th, '13, 11:36, edited 2 times in total.
User avatar
tingjunkie
 
Posts: 1484
Joined: Jul 8th, '0
Location: NYC

Re: Fixing Teapot's Spout

Postby tingjunkie » Feb 10th, '13, 11:17

Or, to be a total bad ass, you could find a hollow animal bone or ivory key from an old piano and carve a spout cap out of it. Then just attach it with the silicone caulk.
User avatar
tingjunkie
 
Posts: 1484
Joined: Jul 8th, '0
Location: NYC

Re: Fixing Teapot's Spout

Postby Maitre_Tea » Feb 10th, '13, 11:37

MarshalN wrote:Did you use one of those bone/wooden sticks to try to clear the spout, and ended up with a broken one? As I always say - toothpicks are the way to go there.


Perhaps by the original owner, but he (my grandfather) doesn't remember or is too embarrassed to admit it. :oops:
User avatar
Maitre_Tea
 
Posts: 803
Joined: Sep 3rd, '0
Location: Claremont,CA

Re: Fixing Teapot's Spout

Postby Drax » Feb 10th, '13, 13:24

I would also recommend a kintsugi type of repair -- kintsugi can handle large missing chunks like the one you have. You'd probably have to find a decent kintsugist, though (yes, I made that word up).
User avatar
Drax
 
Posts: 2568
Joined: Oct 16th, '
Location: Arlington, VA

Re: Fixing Teapot's Spout

Postby Tead Off » Feb 11th, '13, 03:16

Drax wrote:I would also recommend a kintsugi type of repair -- kintsugi can handle large missing chunks like the one you have. You'd probably have to find a decent kintsugist, though (yes, I made that word up).

Kintsugitist or Kintsugitiste. Gold is expensive these days. Silver might be the way to go.
User avatar
Tead Off
Vendor Member
 
Posts: 3547
Joined: Apr 1st, '0
Location: Bangkok

Re: Fixing Teapot's Spout

Postby Maitre_Tea » Feb 11th, '13, 09:23

Tead Off wrote:
Drax wrote:I would also recommend a kintsugi type of repair -- kintsugi can handle large missing chunks like the one you have. You'd probably have to find a decent kintsugist, though (yes, I made that word up).

Kintsugitist or Kintsugitiste. Gold is expensive these days. Silver might be the way to go.


Just curious, how expensive is a kintsugi type of repair? And how would go about getting such a repair, in either the United States or Asia (Taiwan)?
User avatar
Maitre_Tea
 
Posts: 803
Joined: Sep 3rd, '0
Location: Claremont,CA

Re: Fixing Teapot's Spout

Postby paul haigh » Feb 11th, '13, 09:33

Do you have the pieces that are missing?
User avatar
paul haigh
 
Posts: 129
Joined: Apr 4th, '1
Location: Londonderry, NH

Re: Fixing Teapot's Spout

Postby Tead Off » Feb 11th, '13, 10:50

Maitre_Tea wrote:
Tead Off wrote:
Drax wrote:I would also recommend a kintsugi type of repair -- kintsugi can handle large missing chunks like the one you have. You'd probably have to find a decent kintsugist, though (yes, I made that word up).

Kintsugitist or Kintsugitiste. Gold is expensive these days. Silver might be the way to go.


Just curious, how expensive is a kintsugi type of repair? And how would go about getting such a repair, in either the United States or Asia (Taiwan)?

Yellow Pages? Kintsugitism?
User avatar
Tead Off
Vendor Member
 
Posts: 3547
Joined: Apr 1st, '0
Location: Bangkok

Re: Fixing Teapot's Spout

Postby Maitre_Tea » Feb 11th, '13, 11:55

paul haigh wrote:Do you have the pieces that are missing?



No, it went missing way way long ago
User avatar
Maitre_Tea
 
Posts: 803
Joined: Sep 3rd, '0
Location: Claremont,CA

Re: Fixing Teapot's Spout

Postby tingjunkie » Feb 12th, '13, 00:39

Forget affording kintsugi. You'd be lucky just to find someone who could do it.
User avatar
tingjunkie
 
Posts: 1484
Joined: Jul 8th, '0
Location: NYC

Re: Fixing Teapot's Spout

Postby jayinhk » Feb 12th, '13, 04:59

I would avoid silicone sealant for health reasons: a press fit would be much safer. Perhaps a good potter could make you a perfect replacement spout out of porcelain. I was at a very fancy Chinese crafts store yesterday and saw a Yixing teapot with a wenge handle and spout. Never seen anything like it!
User avatar
jayinhk
 
Posts: 962
Joined: Aug 28th, '

Re: Fixing Teapot's Spout

Postby gasninja » Feb 12th, '13, 10:09

I am thinking about giving the silver clay a shot.
I have an older shui ping with a broken spout ,a torch and a kiln.
I'll post pics when I give it a shot.
User avatar
gasninja
 
Posts: 618
Joined: Mar 10th, '
Location: Mount Zion

Next

Instant Messenger

Permissions
You cannot post new topics
You cannot reply to topics
You cannot edit your posts
You cannot delete your posts
You cannot post attachments
Navigation