Hi everyone, I just wanted to share this really cool kettle I found online =) I wouldn't mind having one in my kitchen!
http://www.indiegogo.com/projects/291580/
Feb 20th, '13, 14:37
Posts: 11
Joined: Nov 12th, '09, 01:16
Location: Rhode Island & San Francisco
A kettle different from any you've seen before!
Last edited by Panda on Feb 21st, '13, 11:47, edited 1 time in total.
Re: A kettle different from any you've seen before!
Cool concept - they have a long way to go though and the price point is a bit high. Hits alot of the points people want when they describe what they want in a tea kettle.
Feb 20th, '13, 22:27
Posts: 5896
Joined: Jan 10th, '10, 16:04
Location: Los Angeles, CA
Contact:
debunix
Re: A kettle different from any you've seen before!
Very interesting. I'd like more control over the temp--lowest temp down to no more than 140 and at a minimum 10 degree increments up to boiling. But with that fixed I'd be ready to check one out for reasons of smaller footprint in tight spaces, easier cleaning, easier handling, and sleek appearance, fewer moving parts (no plastic hinges to break, or plastic handles for that matter) and general coolness.
Feb 20th, '13, 22:58
Posts: 20891
Joined: Apr 22nd, '06, 20:52
Scrolling: scrolling
Location: Back in the TeaCave atop Mt. Fuji
Re: A kettle different from any you've seen before!
Coinkeedeenky, Chris Fitzhugh joined the forum today.
Feb 20th, '13, 23:35
Posts: 20891
Joined: Apr 22nd, '06, 20:52
Scrolling: scrolling
Location: Back in the TeaCave atop Mt. Fuji
Re: A kettle different from any you've seen before!
I am curious whether each of the double walls are 1/8" thick or the total wall thickness is 1/8"? And therefore how thick are each of the double wall layers?
Having owned the double thin walled cups, I am also aware how easily they can fail.
Having owned the double thin walled cups, I am also aware how easily they can fail.
Feb 21st, '13, 17:25
Posts: 714
Joined: Feb 12th, '13, 16:21
Location: South Bronx, NYC
Contact:
futurebird
Re: A kettle different from any you've seen before!
I'm in. I hope they make their goal. I don't have any temp control, and I've been thinking of trying something like this.
I'll post about how it all goes. (I signed up for beta testing because I like to live on the edge!)
I'll post about how it all goes. (I signed up for beta testing because I like to live on the edge!)
Feb 22nd, '13, 11:25
Posts: 11
Joined: Nov 12th, '09, 01:16
Location: Rhode Island & San Francisco
Re: A kettle different from any you've seen before!
I'm in the same boat! I've been getting by with a $15 Rival kettle that doesn't even have an on/off switch, let along temperature control. I thought it was time to consider upgradingfuturebird wrote:I'm in. I hope they make their goal. I don't have any temp control, and I've been thinking of trying something like this.
I'll post about how it all goes. (I signed up for beta testing because I like to live on the edge!)
Re: A kettle different from any you've seen before!
Definitely neat looking, but there's no way they're going to hit their goal at this rate. . .
(Edit: fix a typo).
(Edit: fix a typo).
Last edited by Drax on Feb 22nd, '13, 19:03, edited 1 time in total.
Feb 22nd, '13, 18:55
Posts: 11
Joined: Nov 12th, '09, 01:16
Location: Rhode Island & San Francisco
Re: A kettle different from any you've seen before!
I'm bummed it hasn't been going better. I guess tea enthusiasts are just too small a fraction of the population.Drax wrote:Definitely neat looking, but there's no way there's going to hit their goal at this rate. . .
Feb 23rd, '13, 00:42
Posts: 852
Joined: Mar 4th, '10, 22:07
Location: somewhere over the rainbow
Re: A kettle different from any you've seen before!
To be fair, I don't think this kettle is particularly appealing to tea enthusiasts. I think something like this or these or even this would be much more appealing to tea lovers, for a variety of different reasons.Panda wrote:I'm bummed it hasn't been going better. I guess tea enthusiasts are just too small a fraction of the population.Drax wrote:Definitely neat looking, but there's no way there's going to hit their goal at this rate. . .
Re: A kettle different from any you've seen before!
I can think for myself, thank you very much.Poohblah wrote:To be fair, I don't think this kettle is particularly appealing to tea enthusiasts.
I would enjoy a kettle like this one to use at work, much for the reasons that debunix mentioned. And on a personal preference note, I don't like the look of the ones that you linked, other than the tetsubin -- but I don't want to have one of those at work, because I'd need a hotplate, too.
Feb 23rd, '13, 13:51
Posts: 714
Joined: Feb 12th, '13, 16:21
Location: South Bronx, NYC
Contact:
futurebird
Re: A kettle different from any you've seen before!
Poohblah wrote:To be fair, I don't think this kettle is particularly appealing to tea enthusiasts. I think something like this or these or even this would be much more appealing to tea lovers, for a variety of different reasons.Panda wrote:I'm bummed it hasn't been going better. I guess tea enthusiasts are just too small a fraction of the population.Drax wrote:Definitely neat looking, but there's no way there's going to hit their goal at this rate. . .
I like the first two, but I don't have a stove at work, I need a self-heating kettle. The last one isn't beautiful enough. I mean it's functional, but beauty is a thing for me. I like either classic looks or nice clean modernism.
I do think there is a market for this kettle, but I fear the price point is just a bit too high. If it were $120 I think it'd go much better for them.
Feb 23rd, '13, 16:11
Posts: 509
Joined: Oct 8th, '10, 06:59
Scrolling: scrolling
Location: Germany
Re: A kettle different from any you've seen before!
It seems to be trying too hard to be a design object rather than being good at what it's supposed to be used for. The pour is going to be terrible on that thing. I don't think this is a good product design at all (I'm not saying that it looks bad).
Unfortunately, there is no perfect modern kettle on the market. I wonder why. It can't be that hard to make one that would be well received and profitable.
Unfortunately, there is no perfect modern kettle on the market. I wonder why. It can't be that hard to make one that would be well received and profitable.
Feb 24th, '13, 17:47
Posts: 223
Joined: Aug 31st, '09, 20:16
Location: NSW, Australia
Contact:
Hannah
Feb 24th, '13, 19:22
Posts: 223
Joined: Aug 31st, '09, 20:16
Location: NSW, Australia
Contact:
Hannah
Re: A kettle different from any you've seen before!
I have this one currently:
http://www.breville.com.au/beverages/te ... ettle.html
But this one looks perfect for work or even having in a smaller tea room rather than the kitchen.
I think the pour would be OK in the final version, I wouldnt stress too much over it though, I can get by with dodgy pour
It's a pity I don't have $200 to burn or I would be all over this..
http://www.breville.com.au/beverages/te ... ettle.html
But this one looks perfect for work or even having in a smaller tea room rather than the kitchen.
I think the pour would be OK in the final version, I wouldnt stress too much over it though, I can get by with dodgy pour
It's a pity I don't have $200 to burn or I would be all over this..