
Jul 10th, '09, 18:42
Posts: 390
Joined: Jun 7th, '09, 11:03
Location: Pagosa Springs, Colorado, USA
Contact:
shyrabbit
c & j,
I've completed one bisque load and in the process of loading and throwing for another bisque in the next few days. With that complete, I will be back on a glazing cycle. I expect I'll be firing a glaze kiln in about two weeks...If other more pressing events don't come my way, that is. The likelihood that there will be "reds" in this glaze firing is very good....thanks for asking j.
Michael
(posted this piece in the Fav Chawan thread but thought I'd repost it here)
Shino
Ponderosa Pine Ash
Copper Carb.
The red is from the reduced Copper

I've completed one bisque load and in the process of loading and throwing for another bisque in the next few days. With that complete, I will be back on a glazing cycle. I expect I'll be firing a glaze kiln in about two weeks...If other more pressing events don't come my way, that is. The likelihood that there will be "reds" in this glaze firing is very good....thanks for asking j.
Michael
(posted this piece in the Fav Chawan thread but thought I'd repost it here)
Shino
Ponderosa Pine Ash
Copper Carb.
The red is from the reduced Copper

Jul 10th, '09, 19:18
Posts: 390
Joined: Jun 7th, '09, 11:03
Location: Pagosa Springs, Colorado, USA
Contact:
shyrabbit
Jul 16th, '09, 21:49
Posts: 390
Joined: Jun 7th, '09, 11:03
Location: Pagosa Springs, Colorado, USA
Contact:
shyrabbit
The following chawan is glazed with a tenmoku (10% iron oxide) and then over glazed with a celadon (2% iron oxide) effectively resulting in an Amber Celadon. This can also be achieved by taking the base celadon glaze and adding an additional 4% red iron oxide. In the image below the two glazes melted together and averaged their iron content to approx. 6% RIO.
Glaze chemistry is really quite fascinating.

Glaze chemistry is really quite fascinating.

Jul 16th, '09, 22:27
Posts: 1093
Joined: May 2nd, '09, 05:36
Location: Honolulu, Hawaii
Contact:
bonjiri
thanks michael !
this honey yellowish tenmoku looks like a test i did w/ regular tenmoku and ash applied over.shyrabbit wrote:The following chawan is glazed with a tenmoku (10% iron oxide) and then over glazed with a celadon (2% iron oxide) effectively resulting in an Amber Celadon. This can also be achieved by taking the base celadon glaze and adding an additional 4% red iron oxide. In the image below the two glazes melted together and averaged their iron content to approx. 6% RIO.
Glaze chemistry is really quite fascinating.
glaze calc is endless
nice
i like the first celadon too !
what does the insides and foot rings look like ?
Jul 16th, '09, 23:24
Posts: 390
Joined: Jun 7th, '09, 11:03
Location: Pagosa Springs, Colorado, USA
Contact:
shyrabbit
Sorry, they all sold this weekend through eBay and our gallery, SHY RABBIT Contemporary Arts, here in Pagosa Springs, CO.iannon wrote:all right now! where did all your Yunomi go! ive been lurking and watching them for a while on your etsy site and poof they disappear!
http://shyrabbit.com
We are having a very busy summer.
Thanks for looking, I really appreciate it...there will be many more to come soon.
Michael
Jul 17th, '09, 00:13
Posts: 390
Joined: Jun 7th, '09, 11:03
Location: Pagosa Springs, Colorado, USA
Contact:
shyrabbit
Re: thanks michael !
c,bonjiri wrote:this honey yellowish tenmoku looks like a test i did w/ regular tenmoku and ash applied over.shyrabbit wrote:The following chawan is glazed with a tenmoku (10% iron oxide) and then over glazed with a celadon (2% iron oxide) effectively resulting in an Amber Celadon. This can also be achieved by taking the base celadon glaze and adding an additional 4% red iron oxide. In the image below the two glazes melted together and averaged their iron content to approx. 6% RIO.
Glaze chemistry is really quite fascinating.
glaze calc is endless
nice
i like the first celadon too !
what does the insides and foot rings look like ?
If you're talking about the green celadon bowl, it's gone. I didn't get complete images of it. I know, Damn!