Hi,
Is anyone familiar with milling tencha to create matcha?
I see that Samovar has a pricey mill on their site; I've also seen manual mills/griders by Kyocera on e-bay.
Any pointers greatly appreciated.
Cheers.
Re: Matcha grinding
I am not sure how many of us have ever tried grinding out own tencha to produce matcha. The idea personally does not appeal to me. For one very few places actually sell Tencha. Even then I am not sure that the Tencha that makes it to market is of similar quality to produce good matcha. (If it would create great matcha what is it doing being sold as tencha?)
Nov 2nd, '11, 21:46
Posts: 20891
Joined: Apr 22nd, '06, 20:52
Scrolling: scrolling
Location: Back in the TeaCave atop Mt. Fuji
Re: Matcha grinding
I guess nobody is grinding their own. I personally would not bother since good tencha is hard to come by and is likely overpriced for the quality you get.
That and there is already tons of great matcha available.
However, doing it would be ... fascinating.
That and there is already tons of great matcha available.
However, doing it would be ... fascinating.

Re: Matcha grinding
I'm also a bit of a coffee fanatic and grinding freshly roasted beans just before brewing is critical. I guess that's what's piqued my curiosity about the matcha mill.
Thanks for your responses.
Thanks for your responses.
Re: Matcha grinding
I posted a while ago here: http://www.teachat.com/viewtopic.php?f= ... 37#p207437 asking a similar question.
There does not appear to be much interest in grinding your own powdered tea (from tencha or others,) and there doesn't seem to be much support for it in the industry.
Kyocera makes a small mill, however it's quite expensive for its parts, which amount to perhaps 5 dollars worth of material and they sell it for $60 and it might have to be shipped from japan.
Getting the most out of your tea requires grinding it, and I enjoy the extra flavors imparted by the more complete infusion.
I'm ultimately looking to spend $30, but I put a hard cap at $50. I think that should be completely reasonable for two tiny grinding stones, a hand crank, and casing.
There does not appear to be much interest in grinding your own powdered tea (from tencha or others,) and there doesn't seem to be much support for it in the industry.
Kyocera makes a small mill, however it's quite expensive for its parts, which amount to perhaps 5 dollars worth of material and they sell it for $60 and it might have to be shipped from japan.
Getting the most out of your tea requires grinding it, and I enjoy the extra flavors imparted by the more complete infusion.
I'm ultimately looking to spend $30, but I put a hard cap at $50. I think that should be completely reasonable for two tiny grinding stones, a hand crank, and casing.
Dec 3rd, '11, 21:25
Posts: 393
Joined: Apr 18th, '09, 22:56
Location: Louisiana Gulf Coast
Contact:
Dresden
Re: Matcha grinding
I have purchased the little packs of powdered sencha to put in my water bottles at work from Den's in the past... I guess a you could powder your own if you have some sencha that's getting long in the tooth...
But that just seems like a lot of trouble when you could just as easily make some nice houjicha with it.
Mike
But that just seems like a lot of trouble when you could just as easily make some nice houjicha with it.
Mike
Re: Matcha grinding
I personally don't feel there is a comparison to be had between simply grinding your tea for instant infusion and complete consumption versus 'a lot of trouble' to roast it and steeping under hot water (which may not be available)
Dec 5th, '11, 17:39
Posts: 393
Joined: Apr 18th, '09, 22:56
Location: Louisiana Gulf Coast
Contact:
Dresden
Re: Matcha grinding
Are you suggesting that a mill is more common than hot water? As far as roasting it being a lot of trouble, it takes about 30 seconds for a batch to finish.zeto wrote:I personally don't feel there is a comparison to be had between simply grinding your tea for instant infusion and complete consumption versus 'a lot of trouble' to roast it and steeping under hot water (which may not be available)
BTW, nothing is consumed completely.
Mike
Re: Matcha grinding
Its a misnomer that matcha doesn't get infused. You can disprove it by your self. Make some usucha and leave it sitting. The particles will concentrate on the bottom and one the top there will be green water. Water tempeture matters for making ground teas. Also you can see this by trying to make matcha with cold water.
Dec 5th, '11, 20:18
Posts: 393
Joined: Apr 18th, '09, 22:56
Location: Louisiana Gulf Coast
Contact:
Dresden
Re: Matcha grinding
Ed is right in that there is an infusion with matcha. It stands to reason that tea leaves in hot water, regardless of what form they are in, should infuse.
Re: Matcha grinding
While I'll preface this to say that I feel this has devolved into some weird juvenile commentary...
Matcha infuses much faster, and much more easily, because it's surface area has been increased exponentially (even in cool or room temp water which is all that is available in almost all workplaces.) Additionally, it allows you to consume the leaf portions that normally would not be... this gives powedered tea (matcha or otherwise) a particular taste, texture, and nutritional value that other forms lack.
You simply cannot, in any way, substitute the ability to grind tea with something else.
Back on topic: there is this http://shop.samovarlife.com/Matcha-Grin ... 910321.htm but it's price point is totally absurd.
Matcha infuses much faster, and much more easily, because it's surface area has been increased exponentially (even in cool or room temp water which is all that is available in almost all workplaces.) Additionally, it allows you to consume the leaf portions that normally would not be... this gives powedered tea (matcha or otherwise) a particular taste, texture, and nutritional value that other forms lack.
You simply cannot, in any way, substitute the ability to grind tea with something else.
Back on topic: there is this http://shop.samovarlife.com/Matcha-Grin ... 910321.htm but it's price point is totally absurd.
Re: Matcha grinding
This brings to mind coffee. If one takes the time roasting the bean, grinding in a proper mill, and brewing in a careful way, whether by drip or espresso or whatever one likes, you usually wind up with a very good cup. But, this process has almost no adherents when it comes to matcha and I wonder how many Japanese actually go through the motions buying the tencha, grinding, etc. It seems even the schools use prepared powder as I almost never read about someone or a group grinding their own. I wonder how easy it is to get high grade tencha in Japan and whether matcha grinding is more common than I think? Could it be that we have all become lazy? Matcha grinding must be much more economical in the long run.AdamMY wrote:I am not sure how many of us have ever tried grinding out own tencha to produce matcha. The idea personally does not appeal to me. For one very few places actually sell Tencha. Even then I am not sure that the Tencha that makes it to market is of similar quality to produce good matcha. (If it would create great matcha what is it doing being sold as tencha?)
Re: Matcha grinding
From what I've seen, the cost difference is huge.
Once you open matcha, you must use it because the oxidation process is extremely fast. This is not 'as' true for leaf, so getting an equivalent quality ground tea (of any type) that you grind yourself is possible over a longer period of time, which means you can buy in larger bulk.
Matcha will tend to be 1.5-2.5x more expensive than an equivalent amount of leaf. A single grinder will cost, as I've seen, anywhere between $75-$350. I believe you'll make up that cost in less than 10-15 ounces of leaf.
Also if you want to buy ground sencha or white, good luck paying reasonable amounts for that.
That said, I doubt that many people that are actually in japan grind their own. Their shipping and packaging costs there are vastly lower and the from harvest to table time is vastly lower... I would expect them to pay significantly less for equivalent grade.
Once you open matcha, you must use it because the oxidation process is extremely fast. This is not 'as' true for leaf, so getting an equivalent quality ground tea (of any type) that you grind yourself is possible over a longer period of time, which means you can buy in larger bulk.
Matcha will tend to be 1.5-2.5x more expensive than an equivalent amount of leaf. A single grinder will cost, as I've seen, anywhere between $75-$350. I believe you'll make up that cost in less than 10-15 ounces of leaf.
Also if you want to buy ground sencha or white, good luck paying reasonable amounts for that.
That said, I doubt that many people that are actually in japan grind their own. Their shipping and packaging costs there are vastly lower and the from harvest to table time is vastly lower... I would expect them to pay significantly less for equivalent grade.
Re: Matcha grinding
Grinding your own matcha is traditional in Japanese tea ceremony (there's even a special tea ceremony that centres around grinding the first tea of the new year), but even in that world it's exceptionally rare because it's time-consuming and difficult and if not done properly produces less than ideal results.
Re: Matcha grinding
I just purchased the Kyocera green tea mill. I will post again when I get it.
My plan is to refrigerate the grinder prior to use in order to keep the probability for burning low, and then grind up a gram or two and see how it goes.
My plan is to refrigerate the grinder prior to use in order to keep the probability for burning low, and then grind up a gram or two and see how it goes.